Difference between revisions of "HowTo Compile In Debian/Ubuntu"

Revision as of 14:36, 28 April 2007

English | Español

HowTo compile aMule in Debian or Ubuntu by Jacobo221 and GNU Linux helpers

Very special thanks to darknox, Arathornz, guest234, parasito, maya and klando for their tests!

NOTE: This howto will also work for Ubuntu Linux.

See also general Compilation Installation

1 Are you sure you want to compile?
- 1.1 aMule stable release
- 1.2 aMule CVS release
2 Info: What aMule release needs what wxwidgets release?
3 Preparing: Compiling and installing wxwidgets
4 Compiling and installing aMule
5 Compiling on Debian 3.0 aka Woody
6 The easiest: Preparing the system
7 The fastest: Installing the necessary packages
- 7.1 Using wxWidgets 2.6
8 The hardest: Compiling aMule
9 Meeting satisfaction: Installing aMule!
10 The end: Final checks
11 You're done...
12 Final notes

Are you sure you want to compile?

If not, (which is pretty common) decide if you want the aMule stable release or the aMule CVS release.

aMule stable release

These packages are for Debian 3.1 Sarge only!

You can just install latest stable aMule version through debs adding the following lines into your /etc/apt/sources.list file:

deb http://amule-debian.dyndns.org/ debian/

Now run apt-get update && apt-get install amule

Packages in this repository:

amule
amule-daemon
amule-remote-gui
amule-gui-utils (alc, wxcas)
amule-console-utils (amuleweb, alcc, cas)
amule-utils (metapackage for amule-gui-utils and amule-console-utils)

NOTES:

If aMule exits with error message complaining about being unable to open libbfd-2.15.so this usually means you are NOT running Debian Sarge. Don't start making symlinks or doing other workarounds, they can quite easily bork your whole system.

http://dude.gemil.de is deprecated. http://amule-debian.dyndns.org is (for now) just a redirect, but this might change in the future (if the repository has to move due to traffic limitations).

aMule CVS release

These packages are for Debian testing aka Etch only!

You can also get the latest aMule CVS through debs adding the following line into your /etc/apt/sources.list file:

deb http://www.vollstreckernet.de/debian/ testing amule

packages are GPG sighned, so follow this steps:

gpg --keyserver wwwkeys.eu.pgp.net --recv 50D0AE60
gpg -a --export 50D0AE60 > /tmp/key
apt-key add /tmp/key (requires superuser privileges)

Now run apt-get update && apt-get install amule

You might also want to take a look at the other available aMule utilities:

aMule CVS

amule
amule-utils
amule-utils-gui
amule-ed2k
amule-cas
amule-wxcas
amule-xas
amule-common
amule-theme-default
amule-theme-php-default
amule-theme-chicane
amuleweb
amule-remote-gui
amule-daemon
amule-alc
amule-alcc
amule-cmd
amule-i18n-ar
amule-i18n-bg
amule-i18n-ca
amule-i18n-da
amule-i18n-de
amule-i18n-en-gb
amule-i18n-en-us
amule-i18n-es
amule-i18n-es-mx
amule-i18n-et-ee
amule-i18n-eu
amule-i18n-fi
amule-i18n-fr
amule-i18n-gl
amule-i18n-hr
amule-i18n-hu
amule-i18n-it-ch
amule-i18n-it
amule-i18n-ko-kr
amule-i18n-nl
amule-i18n-pl
amule-i18n-pt-br
amule-i18n-pt-pt
amule-i18n-ru
amule-i18n-sl
amule-i18n-zh-cn
amule-i18n-zh-tw

For example, if you think aMule's Web interface rocks and you want to have it too, enter this line after the one above:

For aMule CVS: apt-get install amuleweb

For aMule stable: apt-get install amule-console-utils

If you still want to compile aMule instead of just installing a binary, keep reading...

Info: What aMule release needs what wxwidgets release?

aMule 2.1 needs wxwidgets 2.6. You cannot compile it with newer versions of wxwidgets.
aMule 2.2 needs wxwidgets 2.8. You cannot compile it with older versions of wxwidgets.

Preparing: Compiling and installing wxwidgets

This algorithm works for Debian Sarge and Etch.

To compile aMule, You need to have a current version of wxWidgets installed. To achieve that:

Uninstall every possibly previously installed wxwidgets stuff (see How to uninstall wxWidgets and Check if wx is installed twice)
On Debian Etch: # apt-get install flex bison gettext libgtk2.0-dev python-all-dev zlib1g-dev libjpeg62-dev libpng12-dev libtiff4-dev libgl-dev libglu-dev libesd0-dev libgnomeprintui2.2-dev python-central
Download current wxwidgets wxGTK stable release source code tar ball from http://www.wxwidgets.org/downloads/
$ tar xvzf wxgtk-version.tar.gz
$ cd wxGTK-version
$ ./configure --prefix=/usr --with-gtk --enable-unicode --disable-compat24 --enable-optimise
$ make
# make install
# ldconfig

$ = command executed with normal user account
# = command executed with root account

Compiling and installing aMule

Now that You have installed current wxGTK, go on to compile aMule:

On Debian Etch: # apt-get install autotools-dev quilt libglib2.0-dev zlib1g-dev libgd2-xpm-dev libreadline5-dev libcrypto++-dev
Download current aMule stable release source code tar ball from http://www.amule.org (note: aMule 2.1.3 can only be compiled with wxwidgets 2.6. If You have wxwidgets 2.8 installed, You have to use a newer version of aMule (if there is no newer release, use aMule SVN).
$ tar xvjf aMule-version.tar.bz2
$ cd aMule-version
To have a look what features of aMule You can enable or disable: $ ./configure --help
You should be right with $ ./configure --disable-debug --enable-optimize
$ make
# make install

$ = command executed with normal user account
# = command executed with root account

That's it! Now You can start aMule with commando "amule".

Compiling on Debian 3.0 aka Woody

Important: Have in mind that this HowTo was done having in mind aMule 2.0.0 or greater in Debian 3.0 (Woody/Sarge/Sid).

This HowTo is based on using the apt-get package installer tool, which means you'll have to be able to get super-user (root) access. Also, apt-get requires a perfect packet dependencies installed system. If you usually use apt-get for installing any application, skip this and go to the next section. If you rarely use apt-get but, instead, use dpkg, you can;

A) (Recommended) Solve all the dependencies problems on your system. This can be done by taking a look at the "dpkg -C" output and installing/removing/updating the packages it mentions depending on what's required. This option is the recommended since it will not only ensure your aMule compilation will be most surely correct, but it will also make your system the most stable it can possibly be and from now on you'll be able to use apt-get to not only make easier installations, but also to easily upgrade your system.

B) Force apt-get to ignore the dependencies problems using the -f or --fix-broken switches (just one of them, since they're exactly the same, so that'd be, for example, "apt-get install -f ..."). This option may cause a corrupt installation of some packages which may cause the apps not to work. Also have in mind that using this switch in a system with dependencies problems may cause the system to completely break if the package being installed is a base package (although this is not the case).

C) Follow this instructions but, instead of using "apt-get install foo", use "dpkg -i foo" where foo is the package to install. Remember the packages must be already on the system when installing packages with dpkg. Remember also to download any "Depends" package since it most-surely will be necessary for successfully compiling aMule. Avoid using whichever of the following dpkg switches: --force-all --force-depends-version --force-depends --force-conflicts

If you usually install applications from source, read deltaHF's "aMule compilation / installation HowTo" since your system might not be complying the Debian aMule package dependencies although "dpkg -C" shows no errors.

The easiest: Preparing the system

Once you decided to use apt-get, you must make sure you'll be downloading the latest versions of the packages (aMule team has discovered bugs in some deb packages that would make aMule impossible to compile on Debian without compiling some other libraries too. This bugs have been mostly fixed in those affected debian packages, so it is very important to be sure to have the packages up to date). This is done by issuing:

apt-get update && apt-get dist-upgrade

Note 1: You must be root user to do this. Log in as root or "su" or use "sudo". NB: "sudo" must be specified on both apt-get commands, that is:

sudo apt-get update && sudo apt-get dist-upgrade

"sudo" is not a base command, so it may not be installed on your system, although it most probably will. Be aware that following this HowTo entirely as root may bring some problems later such as being unable to delete certain files as a normal user, so please only use root priviledges when necessary.

Note 2: Woody users (that is, people stuck in the stable Debian 3.0 branch) will be updated to Sarge doing apt-get dist-upgrade.

Note 3: Sid users (that is, people holding the cutting-edge unstable Debian 3.0 branch) could suffer problems from packages not completely implemented or with broken dependencies (both are normal issues in the unstable branch). It is very important to keep this in mind since a compiler (g++) will be installed so it could also be broken and, with it, most applications compiled with it (once upgraded, of course). If a package was broken, to downgrade you can use the --force-downgrade switch with dpkg.

If for whatever reason you think this is too much of a complication, you can just wait a few days until the aMule binary version comes out for your architecture (that is, a .deb file).

The fastest: Installing the necessary packages

Remember you need to be root to install applications using apt-get, since apt-get installs system-wide applications. So, log in as root, use "su" or add "sudo" before every command shown here.

The following are the packages which must be installed:

1) Install the latest stable g++ compiler and the C++ Standard Library

apt-get install g++

the required libraries for compiling aMule (wxbase is not really a requiered packet to compile aMule but, unless you know what you're doing, be sure you install it. I won't show in this this guide how to force aMule's compilation without wxbase):

apt-get install libwxbase2.4-dev libcurl3-dev libgtk1.2-dev libwxgtk2.4-dev

Alternatively you can use apt-get build-dep amule to get all the required depencies for compilation. Anyway, this last method is not sure to work, since it will depend on the latest version on the Debian repository and later versions or CVS versions might have different dependencies. And the required utilities for compiling aMule:

 apt-get install gettext make

Note 5: This can all be done in a single command line, which might be more handy for users using "sudo" to gain root priviledges:

apt-get install g++ libwxbase2.4-dev libcurl3-dev libgtk1.2-dev libwxgtk2.4-dev gettext make

Note 6: From aMule 2.0.0-rc1 to aMule 2.0.0-rc5 (inclusive) the package libcrypto++-dev was necessary for compiling aMule, so if you are compiling any of such versions, apt-get libcrypto++-dev too.

Also, you might be interested in installing libgd2-noxpm-dev if you plan to compile CAS. It is not a required library for compiling CAS, this library is only used by CAS for creating images (since v2.0.0-rc3) on the current aMule status (by running cas -o). If you plan to use this feature of CAS, you need to install LibGD2. Anyway, CAS will compile perfectly well even if LibGD2 isn't installed, since it detects, on compilation time, if this library is installed.

2) Download the latest released aMule source code from here (or look here for an up-to-date link).

Note 7: From now on, I will suppose we are installing aMule 2.0.0-rc3

3) Fix Crypto++ Library 5.1 if using it.

From aMule 2.0.0-rc1 to a aMule 2.0.0-rc5 (inclusive) this library is required because aMule is now supporting SecureIdent (remember, since aMule 2.0.0-rc6, libcrypto++ is optional and not needed by default), but the Crypto++ Debian package has had lots of compiling bugs and still has one (although the rest have been fixed after aMule team's reports). Remember you should have update and dist-upgraded apt-get before installing any Debian package in this HowTo, otherwise, you could be installing (or already have installed) a buggy Crypto++ package and this fix will not suit your needs. To fix the latest crypto++ Debian package only a symbolic link is needed:

ln -s /usr/include/crypto++/cryptopp_config.h /usr/include/crypto++/config.h

If you still can't compile crypto++, try compiling it after running the following command:

ln -s /usr/include/crypto++ /usr/include/cryptopp

Note 8: Since this link needs write permissions in /usr/lib, super-user (root) priviledges are needed. Again, this can be done easily with "su" or "sudo".

Using wxWidgets 2.6

Etch and Sid users can use wxWidgets 2.6 instead of wxWidgets 2.4 (Woody and Sarge users, forget about it. Go straight to the next chapter of this article).

To use wxWidgets 2.6 instead of 2.4, just replace in all the above commands the terms libwxbase2.4-dev and libwxgtk2.4-dev with libwxbase2.6-dev and libwxgtk2.6-dev respectively.

Whether or not you should use wx 2.6 insetad of wx 2.4 is up to you. It has both advantages and disadvantages. Anyway, in most cases, you will be grateful to use wx 2.6, so it is recommended.

The hardest: Compiling aMule

4) Extract the sources. The following will create a folder on your user's home directory where it will extract the sources with the -C switch into it (the following command understands that aMule's sources are on the current directory):

mkdir ~/aMule-compilation/ && tar xzfv aMule-2.0.0rc3.tar.gz -C ~/aMule-compilation/ && cd ~/aMule-compilation/

Note 9: Remember I'm supposing you are extracting aMule 2.0.0-rc3. Change the file name if it doesn't correspond to the actual packed source code filename.

5) Compile aMule! The following command will actually switch to the directory containing aMule 2.0.0rc3 and compile it:

cd ~/aMule-compilation/aMule-2.0.0rc3/ && ./configure && make

Note 10: Please take a look at the configure article.

Note 11: You should check the output of

./configure --help | more

to see if there is any configure switch which might be of your interest, such as --disable-debug --enable-optimise or --bindir=

Note 12: if you get an error message, while compiling, similar to: "In file included from /usr/include/wx/***:***, [...] /usr/include/wx/******:***: internal compiler error: Segmentation fault", then you most probably have problems with wxWidgets. Try with

apt-get install --reinstall wxwin2.4-headers libwxbase2.4 libwxgtk2.4-dev

which will reinstall wxWidgets and will most probably fix the compilation error.

Meeting satisfaction: Installing aMule!

8) What's left? Install aMule (remember you must be root, so log in as root or use "su" or "sudo"):

make install

Now you can remove the sources so you free up space in your hard disk by running:

rm -rf ~/aMule-compilation/

The end: Final checks

If you have sometime installed aMule from the Debian packages (no matter if the package came from http://gunnm.org/~soda ), you will have aMule binaries installed in /usr/bin. But "make install" installs binnaries in /usr/local/bin (unless --prefix= is set in configure). This leads us to the point that when typing "amule" anyone of the two installed aMule versions might be invoked (which one is executed will depend on the $PATH environment variable. You can check it by typing "type amule"). The walk around is very easy: remove the aMule installed through Debian package. You can do this with the command "apt-get remove amule" (do not use "apt-get remove --purge" or you might loose your aMule settings) or with "dpkg --remove amule" (again, never ever use "dpkg --purge" or you might loose your aMule settings). apt-get will remove aMule-utils if you have them installed (only available as a separate package in Sid, in Sarge and Woody aMule utils are included in the base aMule package) while dpkg will leave aMule-utils installed on the system (which, in general, is a bad idea).

Also, if you installed xmule sometime or you are planing to install it, have in mind that the ed2k command exists both in aMule and xMule. You might want to run `type ed2k` to see which ed2k command will be executed and rename the other so you make sure it's never executed by mistake.

You're done...

That's it! Your own compiled aMule is installed on your system and ready to go.

To run aMule, just type "amule". You can check if everything worked by typing "amule -v" and check if the displayed version corresponds with the one you were compiling/installing.

If this HowTo didn't help, you have a rare problem on your system ;-) Take a look at http://www.amule.org (aMule Forums at http://forum.amule.org ) or visit us in #amule on irc.freenode.net and (don't doubt) we'll try to do our best to help you.

Final notes

If you are in one of those rare cases when you wish to compile aMule statically, install also libtiff4-dev (through apt-get install libtiff4-dev). Anyway, this is NOT recommended and, in fact, will probably not do any better or even, not work at all.

@@ Line 108: / Line 108: @@
 ==Info: What aMule release needs what wxwidgets release?==
-* aMule 2.1 needs wxwidgets 2.6. You cannot compile it with wxwidgets 2.8.
+* aMule 2.1 needs wxwidgets 2.6. You cannot compile it with newer versions of wxwidgets.
-* aMule 2.2 needs wxwidgets 2.8. You cannot compile it with wxwidgets 2.6.
+* aMule 2.2 needs wxwidgets 2.8. You cannot compile it with older versions of wxwidgets.
 ==Preparing: Compiling and installing wxwidgets==