1 by elui
2 aMule version <= 2.0.0rc5 (For 9.2-10.0 only)
3 aMule version >= 2.0.0rc6 (For 9.2-10.0 only)
- 3.1 1. Installation with Mandrake wx RPM:
- 3.2 2. Installation with Customs wx RPM:
4 aMule version >= 2.0.0rc6 (For 10.1 only)
- 4.1 1. Installation with Mandrake wx RPM:
- 4.2 2. Installation with Custom wx RPMs:

by elui

This how-to explains the way to install and compile aMule on Mandrake 10.0 by using urpmi. I guess it would work in any other Mandrake version but I haven't tried it.

There is 2 ways to do it now, for aMule until 2.0.0rc5 and for versions above (beginning at rc6).

This is because we can link aMule with wx-2.5.x from 2.0.0rc6

There are others packages needed to install aMule on Mandrake. However, in this case, Mandrake official packages are fine. These packages are:

libgd <----- this is needed only to use the -o option of CAS. If you're not going to use that option, you don't have to install it.

If you also want to compile aMule, you must install the devel packages corresponding to those:

libgd-devel

To install all this packages, you must have well-configured urpmi sources (look easyurpmi or urpmidor to verify). If you have them well-configured, you only must do:

urpmi libgd

urpmi libgd-devel

Let's start

aMule version <= 2.0.0rc5 (For 9.2-10.0 only)

Always remember:

NEVER use wxWidgets packages provided by Official Mandrake (Any versions)
NEVER use wxWidgets packages provided by the PLF

The problem when installing aMule on Mandrake] 10 (and 9.X), is that wxGTK official Mandrake package is linked against GTK2 and aMule needs it to be linked against GTK1. The solution is to use the wx RPM packages from the aMule website.

This can be done following the compilation how-to in the wiki of aMule, but when doing it with urpmi, you have the advantage of controlling the version conflict between Mandrake's wxGTK package and aMule's website package every time you update your system. 1. Create a directory to put in wxGTK and wxBase RPM packages from the aMule website.

mkdir /home/user/RPMS

copy there:

wxGTK-2.4.2.rpm
wxBase-2.4.2.rpm
aMule-2.0.0rc5-MDK_9.2-10.rpm

if you also want to compile aMule you must also copy:

wxGTK-devel-2.4.2.rpm

2. Get in the new directory,

cd /home/user/RPMS

and run genhdlist to create hdlist.cz:

genhdlist

3. Add that directory as a new source to urpmi

urpmi.addmedia dirRPMS file://home/user/RPMS with hdlist.cz

4. Go to RPMDRAKE -> Remove Software, and search for wx. Select wxBase, wxGTK and wxGTK-devel and remove all of them from your computer. If your computer doesn't find any of them, it just wasn't installed, so there's no need to remove it ;)
Make sure you uninstall all wxWidgets, since it could happen that more than one version is installed.

5. Install wxGTK packages from dirRPMS source by doing:

urpmi wxGTK-2.4.2

if you also want to compile aMule you must also install

urpmi wxGTK-devel-2.4.2

6. Install wxBase package

urpmi wxBase-2.4.2

Make sure you install the right packages from dirRPMS copying their exact name after urpmi.

urpmi wxGTK-devel-2.4.2

then you must create the following symbolic links:

ln -sf /usr/bin/wxgtk-2.4-config /usr/bin/wx-config
ln -sf /usr/bin/wxbase-2.4-config /usr/bin/wxbase-config

7. Now you can do

urpmi aMule-2.0.0rc5-MDK_9.2-10.rpm

or compile aMule from the sources .tar.gz

Following this how-to, you get an easy way to install back all of the packages that urpmi will remove each time you update your system with urpmi --auto-select.

After updating the system with urpmi you must remove back wxBase (and wxGTK if it also changes it), and then install the packages from dirRPMS as we have done before.