Difference between revisions of "Compilation Installation"

From AMule Project FAQ
Jump to: navigation, search
(typo and test if captcha is activated)
Line 12: Line 12:
 
'''WARNING:''' Make sure you have '''no''' copies of [[wxWidgets]] installed. If you already have [[wxWidgets]] installed, check [[How to uninstall wxWidgets]] before starting a new installation. If you continue have problems, then [[Check_if_wx_is_installed_twice|check if wx is installed twice]], since that's a common compilation and runtime problem.
 
'''WARNING:''' Make sure you have '''no''' copies of [[wxWidgets]] installed. If you already have [[wxWidgets]] installed, check [[How to uninstall wxWidgets]] before starting a new installation. If you continue have problems, then [[Check_if_wx_is_installed_twice|check if wx is installed twice]], since that's a common compilation and runtime problem.
  
'''NOTE:''' In [[wxWidgets]] >= 2.5.1, [[wxBase]] is not distributed as a separate tarball.
+
There are different versions of the wxWidgets for different platforms. wxGTK is used for Linux, Solaris and BSD, wxMSW for Windows and wxMac for Mac OS X. Here we'll explain the compilation using wxGTK, but it differs only slightly for other toolkits.
  
==== Step 1: [[wxWidgets|wxGTK]] ====
+
Please see the specific articles for more detailed instructions.
 +
*[[HowTo_compile_on_Mac|Compile aMule on Mac]]
 +
*[[HowTo compile on Win32|Compile aMule on Windows]]
 +
 
 +
==== Step 1: [[wxWidgets]] ====
  
 
*Download [[wxWidgets|wxGTK]] ->
 
*Download [[wxWidgets|wxGTK]] ->
**[http://prdownloads.sourceforge.net/wxwindows/wxGTK-2.6.3.tar.bz2 wxGTK-2.6.3.tar.bz2]
+
**[http://downloads.sourceforge.net/wxwindows/wxGTK-2.8.4.tar.bz2 wxGTK-2.8.4.tar.bz2]
**[ftp://biolpc22.york.ac.uk/pub/2.6.3/wxWidgets-2.6.3-Patch-2.tar.gz wxWidgets-2.6.3-Patch-2.tar.gz]
+
  
 
*Compile [[wxWidgets|wxGTK]]
 
*Compile [[wxWidgets|wxGTK]]
**''tar -jxvf wxGTK-2.6.3.tar.bz2''
+
**''tar -jxvf wxGTK-2.8.4.tar.bz2''
**''tar -C wxGTK-2.6.3 -xzvf wxWidgets-2.6.3-Patch-2.tar.gz ''
+
**''cd wxGTK-2.8.4''
**''cd wxGTK-2.6.3''
+
**''Linked against [http://www.gtk.org GTK]2: ./configure --prefix=/usr --with-gtk --enable-unicode --enable-optimise && make
**''Linked against [http://www.gtk.org GTK]2: ./configure --prefix=/usr --with-gtk --enable-unicode --disable-compat24 --enable-optimise && make
+
 
*As '''root''':
 
*As '''root''':
 
**''make install''
 
**''make install''
 
**''ldconfig''
 
**''ldconfig''
  
==== Step 2: [[wxBase]] ====
+
===== [[wxBase]] =====
  
 
*Since [[wxGTK]] 2.5.x, you don't need [[wxBase]] anymore unless you want to compile [[aMuled|aMule daemon]] without X.
 
*Since [[wxGTK]] 2.5.x, you don't need [[wxBase]] anymore unless you want to compile [[aMuled|aMule daemon]] without X.
 +
*To compile wxWidgets without a graphical User Interface, ''use the option --disable-gui''
  
 
==== Step 3: [[aMule]] ====
 
==== Step 3: [[aMule]] ====
Line 47: Line 50:
  
 
*Run [[aMule]] as a regular user from console by typing -> ''amule''
 
*Run [[aMule]] as a regular user from console by typing -> ''amule''
 +
 +
====='''aMule 2.1.3 and wxWidgets 2.8.4'''=====
 +
*In order to compile aMule 2.1.3 against wxWidgets 2.8.4, you need the [http://cvs.pld-linux.org/cgi-bin/cvsweb/SOURCES/aMule-wx.patch?rev=1.2 aMule-wx.patch]
 +
*Apply the patch using ''patch -p1 < aMule-wx.patch'' before executing ''make''.
  
 
== Installing using RPMs ==
 
== Installing using RPMs ==

Revision as of 10:35, 23 August 2007

English | Français | Nederlands | Português | Deutsch | Russian | Italiano

Manual Installation

To install aMule you can either install it from scratch, as described in Compiling From Sources, or use RPMs, as described in the Installing using RPMs section. Using RPMs will speed things up a lot but is not available by default with all linux distributions.

Compiling from Sources

WARNING: Make sure you have no copies of wxWidgets installed. If you already have wxWidgets installed, check How to uninstall wxWidgets before starting a new installation. If you continue have problems, then check if wx is installed twice, since that's a common compilation and runtime problem.

There are different versions of the wxWidgets for different platforms. wxGTK is used for Linux, Solaris and BSD, wxMSW for Windows and wxMac for Mac OS X. Here we'll explain the compilation using wxGTK, but it differs only slightly for other toolkits.

Please see the specific articles for more detailed instructions.

Step 1: wxWidgets

  • Compile wxGTK
    • tar -jxvf wxGTK-2.8.4.tar.bz2
    • cd wxGTK-2.8.4
    • Linked against GTK2: ./configure --prefix=/usr --with-gtk --enable-unicode --enable-optimise && make
  • As root:
    • make install
    • ldconfig
wxBase
  • Since wxGTK 2.5.x, you don't need wxBase anymore unless you want to compile aMule daemon without X.
  • To compile wxWidgets without a graphical User Interface, use the option --disable-gui

Step 3: aMule

  • Compile aMule (please check the configure article) ->
    • tar -zxvf aMule-X.X.X.tar.gz (replace X with the right version number..)
    • cd aMule-X.X.X
    • ./configure --disable-debug --enable-optimize && make
  • As root:
    • make install
  • Run aMule as a regular user from console by typing -> amule
aMule 2.1.3 and wxWidgets 2.8.4
  • In order to compile aMule 2.1.3 against wxWidgets 2.8.4, you need the aMule-wx.patch
  • Apply the patch using patch -p1 < aMule-wx.patch before executing make.

Installing using RPMs

Step 1: wxGTK

  • Install wxGTK ->
    • As root:
      • rpm -Uvh wxGTK-2.6.3-X.rpm (replace X with the right name..)
      • ldconfig

Step 2: aMule

  • Install aMule ->
    • As root:
      • rpm -Uvh aMule-X.rpm (replace X with the right name and version number..)
  • Run aMule as a regular user from your console by typing -> amule