Difference between revisions of "Install-amule-freebsd"

From AMule Project FAQ
Jump to: navigation, search
(=Update 15-Dec-2004: Install aMule-cvs on FreeBSD 5.3=)
 
(48 intermediate revisions by 18 users not shown)
Line 1: Line 1:
−
This page is likely to be updated soon, but it might help you even right now.
+
<center>
 +
[[Install-amule-freebsd|English]] |
 +
[[Install-amule-freebsd-ru|Русский]] |
 +
[[Install-amule-freebsd-es|Espa&ntilde;ol]] |
 +
[[Install-amule-freebsd-it|Italiano]]
 +
</center>
  
−
== Update 15-Dec-2004: Install aMule-cvs on FreeBSD 5.3 ==
+
== Install aMule 2.2.4 on [http://www.freebsd.org FreeBSD] 6.X, 7.X ==
 +
Check that your /usr/ports is up-to-date, for example using portsnap:
 +
          portsnap fetch update
  
−
Make sure you have installed:
+
(you may need portsnap extract or portsnap fetch extract if not done before, you should be told at the end if this is necessary)
−
/usr/ports/x11-toolkits/wxgtk2
+
−
-> Ignore the "problems" about wxgtk2 on FreeBSD. It works perfect!
+
  
−
Download the latest aMule-cvs snapshot
+
Then, as the ports tree has been updated to 2.2.4, you should be able to just
−
[http://www.amule.org/files/download.php?file=5 aMule-cvs Files]
+
  
−
fetch http://amule.hirnriss.net/cvs/aMule-cvs-20041215.tar.bz2
+
Install aMule
  
−
tar -zxvf aMule-cvs-20041215.tar.bz2
+
            cd /usr/ports/net/amule2
 +
            make config
 +
            make install clean
  
−
cd amule-cvs/
 
  
−
./configure --prefix=~/amule-cvs/ \
+
That should download and make all necessary dependencies etc.
  
−
--with-wx-config=/usr/X11R6/bin/wx-config \
+
But if that doesn't work you can try (should also be useful for a newer version of aMule then 2.2.4 and the cvs):
  
−
--with-wxbase-config=/usr/X11R6/bin/wx-config \
 
  
−
--disable-debug --with-curl-config=/usr/local/bin/curl-config \
 
  
−
--enable-optimize --x-libraries=/usr/X11R6/lib \
+
Upgrade the FreeBSD 6.X (not needed on FreeBSD 7.X) flex release (2.5.4) with the new one (2.5.35):
  
−
--x-includes=/usr/X11R6/include --localstatedir=/usr/X11R6/share/gnome \
+
            cd  /usr/ports/textproc/flex
 +
            make install clean
  
−
--datadir=/usr/X11R6/share/gnome --with-html-dir=/usr/X11R6/share/doc \
+
This installation didn't override the old /usr/bin/, but put a new release on /usr/local/bin/.
  
−
--with-crypto-prefix=/usr/local --with-included-gettext --disable-cas
+
Then we need to rename the old flex release:
  
−
gmake
+
            mv /usr/bin/flex /usr/bin/flex.old
−
cd ~/amule-cvs/src/amule
+
  
−
If you would like to install RC7, you can follow the same instructions.
+
And check your version with this command:
  
−
Greetz,
+
            flex --version
−
Martin
+
  
−
[mailto://amule@air-maxx.net amule@air-maxx.net]
+
You should obtain: 2.5.35 (or newer)
  
−
==  Install [[aMule]] 2.0.0rc3 on [http://www.freebsd.org FreeBSD] 5.x  ==
+
Install wxgtk28:
  
−
Why would you ask... we have ''/usr/ports/net/amule''
+
            cd /usr/ports/x11-toolkits/wxgtk28-unicode/
−
Well, this is the stable version 1.2.6
+
            make install clean
−
We wanna stay current or help testing / debugging, why else would you read this?
+
  
−
==  Install ports we need if you don't allready have (see ''pkg_info'')  ==
+
Install cryptopp:
  
−
''x11-toolkits/wxgtk''
+
            cd /usr/ports/security/cryptopp
 +
            make install clean
  
−
also (but you will have these already ;-)) ''devel/gettext'' and ''devel/gmake''
+
Install GD:
  
−
You know how to install ports as a [http://www.bsd.org BSD] user, so I don't have to tell you, I hope. It's just too easy you know. In case you're very new to [http://www.freebsd.org FreeBSD], consult the great [http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook handbook] at [http://www.freebsd.org http://www.freebsd.org].
+
            cd /usr/ports/graphics/gd
 +
            make install clean
  
−
==  Configure  ==
+
Install GeoIP:
  
−
The ''./configure'' does not work 100% automagically, we must help it out a bit.
+
            cd /usr/ports/net/GeoIP/
 +
            make install clean
  
−
Edit the '''<your home>''' tag, of course, or install it elsewhere.
+
Download the aMule 2.2.4 source code
 +
[http://www.amule.org/files/files.php?cat=42 here].
  
−
''./configure --prefix=/home/'''<your home>'''/amule --with-wx-config=/usr/X11R6/bin/wxgtk-2.4-config --with-wxbase-config=/usr/X11R6/bin/wxgtk-2.4-config''
+
            tar -zxvf aMule-2.2.4.tar.bz2
 +
            cd aMule-2.2.2/
  
−
'''NOTE:''' This is one single line, not 3 lines or whatever [http://wiki.org/wiki.cgi?WhatIsWiki wiki]/HTML/your browser wraps this line into.
+
You need to edit the file src/Scanner.l and after the line:
 +
            #include <wx/string.h>
 +
Add the line:
 +
            #include "Scanner.h.in"
  
−
You will see configure doesn't find ''gdlib-config'', even if you installed ''gdlib''. Don't care, it's just not there and it's no "must have". Just skip it.
+
Configure some environement variable, for bash user:
 +
            export CPPFLAGS="-I/usr/local/include"
 +
            export LDFLAGS="-L/usr/local/lib"
 +
Or for csh user (default under FreeBSD):
 +
            setenv CPPFLAGS "-I/usr/local/include"
 +
            setenv LDFLAGS "-L/usr/local/lib"
 +
Then start the compilation:
 +
           
 +
            ./configure --prefix=/home/'''user'''/aMule-2.2.4/ \
 +
            --with-wx-config=/usr/local/bin/wxgtk2u-2.8-config --with-crypto-prefix=/usr/local/ \
 +
            --disable-debug --with-curl-config=/usr/local/bin/curl-config --enable-webserver  \
 +
            --enable-optimize --with-included-gettext --enable-amule-daemon --enable-amulecmd \
 +
            --enable-cas --enable-alcc --enable-geoip
  
−
'''NOTE:''' If you get the following warning:
+
'''NOTE:''' Check [[configure]]. Also, change '''user''' for your user name.
  
−
''WARNING!! Your wxWidgets copy has been linked against GTK2 and this will make aMule be unstable, use so much cpu and ram. You have been advised, don't report bugs so.''
+
            gmake
 +
            gmake install
  
−
at the end of ''configure'' you are probably linking against [[wxWidgets|wxGTK2]] instead of [[wxWidgets|wxGTK]]. [[aMule]] will memleak and eat your CPU. It will probably crash as well. Use [[wxWidgets|wxGTK]] as mentioned above!
+
And start it:
 +
          ./amule-2.2.4/bin/amule &
  
−
==  Make  ==
 
  
 +
== Configuration info ==
  
−
''make'' will fail, use ''gmake''
+
After successfully installing:
  
−
''make'' is [http://www.bsd.org BSD] [http://www.gnu.org/software/make make], ''gmake'' is [http://www.gnu.org GNU] [http://www.gnu.org/software/make make]. They are '''not''' compatible.
+
The program directory can be found: (~./aMule/). Means as root:
  
−
Now do:
+
/root/.aMule/
  
−
''gmake''
+
any other user:
  
−
Get yourself a hot green tea (I prefer some sort of sencha) while it is compiling.
+
/usr/home/<username>/.aMule/
  
−
Then do:
+
amule.conf can be found directly in the program folder. The webserver config file has to be made:
  
−
''gmake install''
+
# amuleweb -w.
  
−
==  Use it  ==
+
and is called remote.conf
−
 
+
−
 
+
−
Just start it with ''/home/<your home>/amule/bin/amule''
+
−
or wherever you installed it to...
+
−
 
+
−
Have phun
+
−
 
+
−
Eugene
+
−
 
+
−
== The rc6 port ==
+
−
 
+
−
Visit http://www.amule-project.net/amule/thread.php?threadid=3758 and do as it sais ;-)
+
−
 
+
−
== The rc7 port ==
+
−
 
+
−
Hi all, the rc7 port is now available on my website : http://contribs.martymac.com.
+
−
I've also added binaries for those who don't want to spend time to compile. The port works on FreeBSD 4.10 and 5.2.1. Any feedback welcome. I've changed some options to the Makefile : amule-ed2k-handler is now amule-ed2k, and cmd+GUI options are now joined in global ones. Do a "make config" prior to the "make install" to update your config file.
+
−
 
+
−
Enjoy :)
+
−
 
+
−
Ganael LAPLANCHE
+
−
 
+
−
http://contribs.martymac.com
+
−
 
+
−
[mailto://ganael.laplanche@martymac.com ganael.laplanche@martymac.com]
+

Latest revision as of 18:13, 8 February 2010

English | Русский | Español | Italiano

Install aMule 2.2.4 on FreeBSD 6.X, 7.X

Check that your /usr/ports is up-to-date, for example using portsnap: 

          portsnap fetch update

(you may need portsnap extract or portsnap fetch extract if not done before, you should be told at the end if this is necessary)

Then, as the ports tree has been updated to 2.2.4, you should be able to just

Install aMule 

           cd /usr/ports/net/amule2
           make config
           make install clean


That should download and make all necessary dependencies etc.

But if that doesn't work you can try (should also be useful for a newer version of aMule then 2.2.4 and the cvs):


Upgrade the FreeBSD 6.X (not needed on FreeBSD 7.X) flex release (2.5.4) with the new one (2.5.35): 

           cd  /usr/ports/textproc/flex
           make install clean

This installation didn't override the old /usr/bin/, but put a new release on /usr/local/bin/.

Then we need to rename the old flex release: 

           mv /usr/bin/flex /usr/bin/flex.old

And check your version with this command: 

           flex --version

You should obtain: 2.5.35 (or newer)

Install wxgtk28: 

           cd /usr/ports/x11-toolkits/wxgtk28-unicode/
           make install clean

Install cryptopp: 

           cd /usr/ports/security/cryptopp
           make install clean

Install GD: 

           cd /usr/ports/graphics/gd
           make install clean

Install GeoIP: 

           cd /usr/ports/net/GeoIP/
           make install clean

Download the aMule 2.2.4 source code here. 

           tar -zxvf aMule-2.2.4.tar.bz2
           cd aMule-2.2.2/

You need to edit the file src/Scanner.l and after the line: 

           #include <wx/string.h>

Add the line: 

           #include "Scanner.h.in"

Configure some environement variable, for bash user: 

           export CPPFLAGS="-I/usr/local/include"
           export LDFLAGS="-L/usr/local/lib"

Or for csh user (default under FreeBSD): 

           setenv CPPFLAGS "-I/usr/local/include"
           setenv LDFLAGS "-L/usr/local/lib"

Then start the compilation: 

           ./configure --prefix=/home/user/aMule-2.2.4/ \
           --with-wx-config=/usr/local/bin/wxgtk2u-2.8-config --with-crypto-prefix=/usr/local/ \
           --disable-debug --with-curl-config=/usr/local/bin/curl-config --enable-webserver  \
           --enable-optimize --with-included-gettext --enable-amule-daemon --enable-amulecmd \
           --enable-cas --enable-alcc --enable-geoip

NOTE: Check configure. Also, change user for your user name. 

           gmake
           gmake install

And start it: 

          ./amule-2.2.4/bin/amule &


Configuration info

After successfully installing:

The program directory can be found: (~./aMule/). Means as root:

/root/.aMule/

any other user:

/usr/home/<username>/.aMule/

amule.conf can be found directly in the program folder. The webserver config file has to be made:

  1. amuleweb -w.

and is called remote.conf

Retrieved from "http://wiki.amule.org/t/index.php?title=Install-amule-freebsd&oldid=27527"