Server.met file

From AMule Project FAQ
Revision as of 19:04, 9 June 2005 by 82.155.142.215 (Talk)

Jump to: navigation, search

File

Name: server.met

Location: ~/.aMule/

Description

Binary file containing the list of servers known to aMule.

Because its in binary format, it must be changed within aMule, or with other appropriate tools.

The format description below is for development information purposes.

Format

File Format

This file's fields are written in little endian order.

Note: All digit fields are unsigned unless stated.

  • Met Header (1 Byte): With value Ox0E or OxE0, and is used in aMule to check for valid server.met files
  • Server Count (4 Bytes): Lists the number of servers that follow
  • Block of servers: Each server is constituted by the following fields:
    • Server IP (4 Bytes): Simply that. The server's IP.
    • Server Port (2 Bytes): Simply that. The port through which aMule will connect to the server.
    • Tag Count (4 Bytes): Lists the number of server tags that follows.
    • Block of Tags: Each server can have a list of associated tags with the format bellow.

Tags Format

General tags format

There are two tag identifiers: A name (string) and an ID (1 Byte)

Which one is used depends on the tag value type given or on the size of the tag name. If tag name length is 1, an ID is used.

  • Tag value type (1 Byte)
  • Tag Name Length (2 Bytes)
  • Tag Name (size given above)
  • Tag value (size depends on tag type)

Tag value types

Tag types
Tag type (Code) Explanation
TAGTYPE_STRING (0x02) (*) Defines a string tag.
TAGTYPE_UINT32 (0x03) Defines a numeric tag.

(*): Systems with Unicode enabled have the same tag string defined twice, the first in Unicode, and the second in plain ASCII, which will be ignored by Unicode enabled clients, and used by non-Unicode ones.

Tag IDs

Tag IDs
ID (code) Tag value type
ST_SERVERNAME (0x01) TAGTYPE_STRING
ST_DESCRIPTION (0x0B) TAGTYPE_STRING
ST_PING (0x0C) TAGTYPE_UINT32
ST_FAIL (0x0D) TAGTYPE_UINT32
ST_PREFERENCE (0x0E) TAGTYPE_UINT32
ST_DYNIP (0x85) TAGTYPE_STRING
ST_MAXUSERS (0x87) TAGTYPE_UINT32
ST_SOFTFILES (0x88) TAGTYPE_UINT32
ST_HARDFILES (0x89) TAGTYPE_UINT32
ST_LASTPING (0x90) TAGTYPE_UINT32
ST_VERSION (0x91) TAGTYPE_STRING / TAGTYPE_UINT32
ST_UDPFLAGS (0x92) TAGTYPE_UINT32
ST_AUXPORTSLIST (0x93) TAGTYPE_STRING
ST_LOWIDUSERS (0x94) TAGTYPE_UINT32

Tag Names

There are at the moment two tag names recognized by aMule:
Tag Name Tag Value
"files" TAGTYPE_UINT32 Shows the number of files registered in the server
"users" TAGTYPE_UINT32 Shows the number of users registered in the server

For more information check the ed2k tag documentation at the Hidranode project

Example