HowTo Compile In Gentoo

From AMule Project FAQ
Revision as of 17:00, 21 October 2011 by Libre (Talk | contribs)

Jump to: navigation, search

English | Deutsch | Español

English version updated: 01.08.2009 - Newest Gentoo Version are now 2.2.5.

Introduction

Gentoo is known for choices. As such, aMule comes in a variety of versions. This article will cover the installation of the last PORTAGE version, and of aMule SVN through a personal overlay.

Methods of Installation

amule-2.2.5.ebuild

This ebuild matches the 2.2.5 stable aMule release, it is available 28.08.2009 in portage.

Dependencies: >=x11-libs/wxGTK-2.8*; >=dev-libs/crypto++-5.5.2; >=sys-libs/zlib-1.2.1

Conditional dependencies: >=dev-libs/geoip for geoip support; >=net-libs/libupnp for Intel UPnP stack support; >=media-libs/libpng-1.2.0 for remote support; >=media-libs/gd-2.0.26 for unicode support and or statistic reporting.

Installation instructions

amule-2.2.5.ebuild

1. Show what will be done: 

 emerge -pv amule

2. Adjust your USE flags for amule into /etc/portage/package.use

3. Emerge amule: 

 emerge -a amule

amule SVN

It is no ebuild for the current aMule SVN so we need to add one in portage. For that, we will make use of a personal portage overlay. If you don't already have one, just follow this HOWTO article: Overlay: Creating_a_local_overlay

We will also follow the naming scheme of portage. SVN ebuild from a SVN tarball are not named as package_name-SVN but as package_name-version_date_of_the_tarball. That is to distinguish them from real SVN ebuilds (the so called live ebuilds) named as package_name-9999 and using keywords="". As aMule is using the revision to name the tarball, we will use it for the version_date_of_the_tarball.

1. Define PORTDIR_OVERLAY. Open up /etc/make.conf with your favourite text editor and define the PORTDIR_OVERLAY variable. We will use: 

 PORTDIR_OVERLAY="/usr/local/portage"

2. Create overlay for amule-svn: 

 mkdir -p /usr/local/net-p2p/amule

3. Add to package.keywords: 

 echo "net-p2p/amule ~x86" >> /etc/portage/package.keywords

4. Copy the following ebuild into {PORTDIR_OVERLAY}/net-p2p/amule/amule-9732.ebuild

I use here the tarball from 31 July 2009 revision 9732 that was working fine for me, but you can change the revision like you want. Be careful to choose a version number available on the tarballs page, otherwise your ebuild will fail.

The SVN ebuild

ChangeLog:

  • 01-08-2009 Initial SVN ebuild
  • 04-08-2009 Updated DEPEND + RDEPEND
  • 27-08-2009 Updated for the 2_2_X trunk
  • 12-04-2011 USE flag change
  • 16-04-2011 Updated to EAPI="3
  • 14-10-2011 Workaround debian specific test with USE=plasma

For more details, see the forum thread. 

# Copyright 1999-2011 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: $

EAPI="3"

inherit eutils flag-o-matic kde4-base wxwidgets

MY_P="aMule-SVN-r${PV}"
S="${WORKDIR}"/${MY_P}

DESCRIPTION="aMule, the all-platform eMule p2p client"
HOMEPAGE="http://www.amule.org/"
SRC_URI="http://amule.sourceforge.net/tarballs/${MY_P}.tar.bz2"

LICENSE="GPL-2"
SLOT="0"
KEYWORDS="~alpha ~amd64 ~hppa ~ppc ~ppc64 ~sparc ~x86"
IUSE="daemon debug ed2k fileview geoip gtk mmap nls plasma remote static stats unicode upnp xchat"

RESTRICT="nomirror"

DEPEND="=x11-libs/wxGTK-2.8.12*
	>=dev-libs/crypto++-5.5.2
	>=sys-libs/zlib-1.2.1
	stats? ( >=media-libs/gd-2.0.26[jpeg] )
	geoip? ( dev-libs/geoip )
	plasma? ( kde-base/kdelibs )
	upnp? ( >=net-libs/libupnp-1.6.6 )
	remote? ( >=media-libs/libpng-1.2.0
	unicode? ( >=media-libs/gd-2.0.26 ) )"

RDEPEND="$DEPEND
	xchat? ( net-irc/xchat[perl] )"


pkg_setup() {
	if ! use gtk && ! use remote && ! use daemon; then
		eerror ""
		eerror "You have to specify at least one of gtk, remote or daemon"
		eerror "USE flag to build amule."
		eerror ""
		die "Invalid USE flag set"
	fi

	if use stats && ! use gtk; then
		einfo "Note: You would need both the gtk and stats USE flags"
		einfo "to compile aMule Statistics GUI."
		einfo "I will now compile console versions only."
	fi
}

pkg_preinst() {
	if use daemon || use remote; then
		enewgroup p2p
		enewuser p2p -1 -1 /home/p2p p2p
	fi
}

src_configure() {
	local myconf

	WX_GTK_VER="2.8"

	if use gtk; then
		einfo "wxGTK with gtk support will be used"
		need-wxwidgets unicode
	else
		einfo "wxGTK without X support will be used"
		need-wxwidgets base
	fi

	if use gtk ; then
		use stats && myconf="${myconf}
			--enable-wxcas
			--enable-alc"
		use remote && myconf="${myconf}
			--enable-amule-gui"
	else
		myconf="
			--disable-monolithic
			--disable-amule-gui
			--disable-wxcas
			--disable-alc"
	fi

	DEB_HOST_ARCH="no" econf \
		--with-wx-config=${WX_CONFIG} \
		--enable-amulecmd \
		$(use_enable debug) \
		$(use_enable !debug optimize) \
		$(use_enable daemon amule-daemon) \
		$(use_enable ed2k) \
		$(use_enable fileview) \
		$(use_enable geoip) \
		$(use_enable mmap) \
		$(use_enable nls) \
		$(use_enable plasma plasmamule ) \
		$(use_enable remote webserver) \
		$(use_enable static) \
		$(use_enable stats cas) \
		$(use_enable stats alcc) \
		$(use_enable upnp) \
		$(use_enable xchat xas) \
		${myconf} || die
}

src_install() {
	emake DESTDIR="${D}" install || die

	if use daemon; then
		newconfd "${FILESDIR}"/amuled.confd amuled
		newinitd "${FILESDIR}"/amuled.initd amuled
	fi
	if use remote; then
		newconfd "${FILESDIR}"/amuleweb.confd amuleweb
		newinitd "${FILESDIR}"/amuleweb.initd amuleweb
	fi
}


5. Change directory: 

 cd /usr/local/portage/net-p2p/amule/

6. Copy the files directory from PORTAGE: 

 cp -r /usr/portage/net-p2p/amule/files files

7. Remove the unneeded files: 

 rm files/*.patch

8. Digest the ebuild: 

 ebuild amule-9732.ebuild digest

9. As you can see, this ebuild depend on x11-libs/wxGTK-2.8.12 which is not yet in portage. You can find it at Gentoo's Bugzilla – Bug 363319. What you have to do is to dpwnload the ebuild from bugzilla and put it into the x11-libs/wxGTK directory of your overlay. You must also copy the files directory from PORTAGE and digest the ebuild: 

 cd /usr/local/portage/x11-libs/wxGTK
 cp -r /usr/portage/x11-libs/wxGTK/files files
 ebuild wxGTK-2.8.12.ebuild digest

10. Review installation flags: 

 emerge amule -pv

11. Modify /etc/portage/package.use to suit your needs (please note that debug is enabled regardless of USE flag): 

 net-p2p/amule -amuled -debug geoip gtk nls -remote -stats unicode

This would install amule without deamon and remote support. To activate deamons and remote options, leave out the '-' like this: 

 net-p2p/amule amuled -debug geoip gtk nls remote -stats unicode

As aMule needs unicode support or it won't compile, you might also want to add a line to enable unicode in x11-libs/wxGTK 

 x11-libs/wxGTK unicode

12. Install aMule SVN: 

 emerge amule

PLEASE do emerge amule -pv before installing to determine how you want to compile aMule.

13. As other programs can depend on wxGTK, it can be a good opportunity to update your system as usual. emerge --sync, and so on as explained into the handbook.

Possible crash

On my ~amd64 system, I get a crash at amule startup with recent libcrypto++ versions. To avoid it, mask it into /etc/portage/package.mask: 

echo =dev-libs/crypto++-5.6.0 >> /etc/portage/package.mask
echo =dev-libs/crypto++-5.6.0-r1 >> /etc/portage/package.mask
echo dev-libs/crypto++-5.6.1 >> /etc/portage/package.mask
emerge -a crypto++ amule
revdep-rebuild

Revdep-rebuild didn't find anything into my system, but it is safer to run it anyway.

Another solution is to use the ebuild and the patch in bug 322713 for merging the last version of libcrypto++.

Update: It look like to be fixed. If it should append again with the same crypto++ version, please ask to reopen this bug.

Retrieved from "http://wiki.amule.org/w/index.php?title=HowTo_Compile_In_Gentoo&oldid=28394"