Difference between revisions of "Nodes.dat file"

Revision as of 01:26, 14 June 2008

File

Name: nodes.dat

Location: ~/.aMule/

Description

This file stores details about other known Kademlia clients (also known as nodes).

It is usually used to achieve a successful bootstrap faster.

A nodes.dat file can be found at http://download.tuxfamily.org/technosalad/utils/nodes.dat to get you connected in the Kad network.

Format

The following information is valid only for aMule up to 2.1.3. 2.2.0 uses a different format.

As you can see, all the fields are stored without any separator character. This is done like this because all the fields have a specific size:

• Number of contacts: Number of contacts that will be listed (4 bytes)

After specifying the number of contacts that will be listed, the file lists them. Each contact takes 25 bytes, splitted into the following fields:

• ClientID: The contact's ClientID (16 bytes)
• IP: The contact's IP (4 bytes)
• UDP Port: The UDP port to connect to when trying to reach the contact (2 bytes)
• TCP Port: The TCP port to connect to when trying to reach the contact (2 bytes)
• Type: This indicates the type of the contact, which is how much you can be confident on that contact (a scale from 0 to 4, being 0 the best and 4 the worst). (1 byte)

Once this data is put together, it is stored in little-endian.

Example

The following is a hex dump of an hypothetic nodes.dat file:

0200000012257425DBA4EDDBD097150757404486E55E04DE40123612021F64632587A31EC2FC8566C4A9BAB184E6E9B7D44012361202

In the above example, the following data can be seen:

• Number of contacts: 2 (In hex: 02000000, remember it's in little endian)
• Contact #1:
  • ClientID: 12257425DBA4EDDBD097150757404486
  • IP: 222.4.94.229 (In hex: E55E04DE, remember it's in little endian)
  • UDP Port: 1240 (In hex: 4012, remember it's in little endian)
  • TCP Port: 1236 (In hex: 3612, remember it's in little endian)
  • Type: 2 (In hex: 02)
• Contact #2:
  • ClientID: 1F64632587A31EC2FC8566C4A9BAB184
  • IP: 212.183.233.230 (In hex: E6E9B7D4, remember it's in little endian)
  • UDP Port: 1240 (In hex: 4012, remember it's in little endian)
  • TCP Port: 1236 (In hex: 3612, remember it's in little endian)
  • Type: 2 (In hex: 02)

Extra

Since the number of contacts field is 4 bytes long, the maximum number of nodes you could store in this file is 4294967296 (~4300M), which should be far enough. Anyway, since this number is so big, aMule, eMule and all clients have hard limitted the amount of contacts that can be stored (aMule's hard limit is 5000).

Since Type 4 contacts are those which are marked for deletion, there should never be any Type 4 contact in the nodes.dat file. If there was, it would just be ignored when reading the file.

Script for dumping nodes.dat

Here's a little script I wrote for dumping contents of the nodes.dat file:

#!/usr/bin/env python
# this code belongs to public domain

import struct
nodefile = open('nodes.dat', 'r')
(count,) = struct.unpack("<I", nodefile.read(4)) 

print ' idx type    ip address    udp   tcp'
for i in xrange(count):
  (clientid, ip1, ip2, ip3, ip4, udpport, tcpport, type) = \
      struct.unpack("<16s4BHHB", nodefile.read(25))
  ipaddr = '%d.%d.%d.%d' % (ip1, ip2, ip3, ip4)
  print '%4d %4d %-15s %5d %5d' % (i, type, ipaddr, udpport, tcpport)
nodefile.close()

Version

Created by "Unknown User" on 28.08.05 at 06:43
Updated by Vollstrecker on 23.01.08 at 14:49