IPFilter
Contents
Description
The IP Filter blocks traffic from/to IPs and ranges of IPs with our client. This means that those IPs which get blocked will not be able neither to upload to us nor to download from us.
This filter is read from ~/.aMule/ipfilter.dat and ~/.aMule/ipfilter_static.dat. The content of these files describes the valid and blocked IP ranges.
ipfilter.dat file
The information and details about the ipfilter.dat file can be found here.
Using the IP Filter in aMule
The Access level of the IP filter is selected in aMule through "Preferences" -> "Security" -> "IP Filtering" -> "Filtering level" (in aMule versions up to 2.0.0-rc8 it is under "Server", instead of "Security").
NOTE: aMule's ipfilter.dat file is 100% compatible with eMule's.
Using an external IPfilter.dat
aMule by default uses ~/.aMule/ipfilter.dat for IP filtering. If you enable 'Use system-wide ipfilter.dat if available', it will look for a /usr/share/amule/ipfilter.dat file if loading the local ipfilter.dat fails.
The above paths assume a linux-like system.
This option is located though "Preferences" -> "Security" and is disabled by default in the latest stable 2.2.2 build.
IP Filter sources
IP Filter - URLs for Auto-update at startup
Insert the URL under "Preferences" -> "Security" -> "IP filtering" -> "URL:"
http://emulepawcio.sourceforge.net/ipfilter.dat (updated monthly)
http://www.bluetack.co.uk/config/nipfilter.dat.gz (Bluetack´s normal ipfilter.dat)
http://www.bluetack.co.uk/config/pipfilter.dat.gz (Bluetack´s paranoid ipfilter.dat)
IP Filter sites
You can insert the lists from these sites either manually or with a script. Or you can use seperate IP-blocking software like Protowall from Bluetack, PeerGuardian from Phoenixlabs or moblock.
The lists from Phoenixlabs (formerly known as Methlabs) are still under development. They use the lists from Bluetack instead.
http://bluetack.co.uk/config/sources.txt (If you follow this link then download the lists as *.gz or *.zip instead of *.txt in order to save Bluetack´s bandwith!)
http://emulepawcio.sourceforge.net/nieuwe_site/ipfilter_fake_list.html
Hard coded IP filter in aMule
aMule has some ranges of IPs which it filters by default following the RFC 3330 document. These ranges are:
Address Block Present Use Reference
----------------------------------------------------------------------
"0.0.0.0/8", // "This" Network [RFC1700, page 4]
"10.0.0.0/8", // Private-Use Networks [RFC1918]
"14.0.0.0/8", // Public-Data Networks [RFC1700, page 181]
"24.0.0.0/8", // Cable Television Networks --
"39.0.0.0/8", // Reserved but subject
// to allocation [RFC1797]
"127.0.0.0/8", // Loopback [RFC1700, page 5]
"128.0.0.0/16", // Reserved but subject
// to allocation --
"169.254.0.0/16", // Link Local --
"172.16.0.0/12", // Private-Use Networks [RFC1918]
"191.255.0.0/16", // Reserved but subject
// to allocation --
"192.0.0.0/24", // Reserved but subject
// to allocation --
"192.0.2.0/24", // Test-Net
"192.88.99.0/24", // 6to4 Relay Anycast [RFC3068]
"192.168.0.0/16", // Private-Use Networks [RFC1918]
"198.18.0.0/15", // Network Interconnect
// Device Benchmark Testing [RFC2544]
"223.255.255.0/24",// Reserved but subject
// to allocation --
"224.0.0.0/4", // Multicast [RFC3171]
"240.0.0.0/4" // Reserved for Future Use [RFC1700, page 4]
However, you can un-filter these ranges of IPs by unchecking "Preferences"->"Security"->"IP-filtering"->"Always filter bad IPs" (on aMule versions up to 2.0.0-rc8, this option can be found in "Preferences"->"Server"->"Always filter bad IPs").
